WD Red Plus NAS - WD20EFPX - 2TB 3.5in SATA III (6Gb/s) 5400 RPM 64MB Cache
WD Red Plus WD20EFPX 2TB NAS HDD — 3.5in SATA III 6Gb/s, 5400 RPM, 64MB cache, hot-swap support, low power consumption; optimized for multi-bay NAS systems.
Please Note
The website is currently being actively developed, you are welcome to place the order and in 99% of the cases your order will be processed as usual, but in some cases there may be a delay or the price may change. We will notify you if there are any issues.
Discontinued
This item was discontinued and currently is not available for order on our website. The item may become available soon. Please contact us if you need more information regarding the upcoming arrivals.
| Storage (SSD & HDD) - Type | HDD |
|---|---|
| Storage (SSD & HDD) - Capacity | 2TB |
| Storage (SSD & HDD) - Interface | SATA III 6Gb/s |
| Storage (SSD & HDD) - Form Factor | 3.5inch |
| Storage (SSD & HDD) - RPM (HDD) | 5400 RPM |
| Storage (SSD & HDD) - Cache (HDD) | 64MB |
| Storage (SSD & HDD) - Intended Use | NAS |
Western Digital Red Plus . HDD capacity: 2 TB. HDD speed: 5400 RPM. Storage drive buffer size: 64 MB. HDD size: 3.5". Interface: Serial ATA
| HDD capacity | 2 TB |
| HDD speed | 5400 RPM |
| Storage drive buffer size | 64 MB |
| HDD size | 3.5" |
| Interface | Serial ATA |
| Type | HDD |
| Component for | NAS |
| Feature | Hot-swap |
| HDD interface transfer rate | 6 Gbit/s |
| HDD sustained transfer rate | 150 MiB/s |
| Start/stop cycles | 600000 |
| Mean time between failures (MTBF) | 1000000 h |
| Power consumption (standby) | 0.4 W |
| Power consumption (read) | 3.3 W |
| Power consumption (write) | 3.3 W |
| Power consumption (idle) | 2.3 W |
| Operating voltage | 5 / 12 V |
| Start-up current | 1.2 A |
| Operating temperature (T-T) | 0 - 65 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating shock | 30 G |
| Non-operating shock | 350 G |
| Width | 101.6 mm |
| Height | 26.1 mm |
| Depth | 147 mm |
| Weight | 450 g |
| Quantity per pack | 1 pc(s) |