Thermaltake

Thermaltake Toughpower PT 850W 80 PLUS Platinum ATX 3.1 PSU (Boxed)

SKU 58506 Brand Thermaltake EAN13 4711658545107
Thermaltake Toughpower PT 850W delivers premium 80 PLUS Platinum efficiency (92%) with ATX 3.1 compliance, fully modular cables, and advanced protection. Ideal for high-end gaming and workstation builds.
PSU (Power Supplies) - Wattage 800 - 899 W
PSU (Power Supplies) - Efficiency Rating 80 Plus Platinum
PSU (Power Supplies) - Color Black
PSU (Power Supplies) - Modularity Fully modular
PSU (Power Supplies) - PCIe GPU Connectors 4x 8/6 pins
PSU (Power Supplies) - Length Up to 140 mm
PSU (Power Supplies) - EPS CPU Connectors 1x 4+4pin EPS/ATX12V

The Thermaltake Toughpower PT 850W is a premium power supply featuring 80 PLUS Platinum certification with up to 92% efficiency, significantly reducing energy loss and heat output compared to lower-tier units. Designed for modern high-performance systems, it offers full ATX 3.1 compliance with support for up to 200% total power excursion and 3× GPU power excursion, ensuring stability for today's most demanding graphics cards and future hardware.

Built with premium components including Japanese capacitors, a hydraulic-bearing fan, and a fully modular cable design, this PSU delivers clean, stable power with a single 12V rail configuration (849.6W combined output, 70.8A maximum). The unit features comprehensive protection circuits (OVP, OCP, OPP, SCP, OTP) and operates continuously at full load up to 40°C. With a 13.5cm hydraulic-bearing fan and smart zero-fan mode, it maintains whisper-quiet operation during typical gaming loads while managing thermal performance effectively.

Connectivity includes 1× 12+4pin EPS CPU connector, 4× 6+2pin PCIe GPU connectors, 6× SATA connectors, and 4× 4-pin Molex connectors, providing comprehensive compatibility with modern and legacy components. The fully modular cable system with flat ribbon design enables clean cable management in any build aesthetic.

  • 80 PLUS Platinum efficiency (92%) reduces energy waste and operating costs
  • ATX 3.1 compliant with enhanced power excursion support for next-gen GPUs
  • Fully modular cables with flat ribbon design for optimal cable management
  • Japanese capacitors and hydraulic-bearing fan for premium reliability
  • Comprehensive protection suite: OVP, OCP, OPP, SCP, OTP
  • Single 12V rail with 70.8A maximum output for stable power delivery
  • Smart zero-fan mode for silent operation at low loads
  • Operating temperature range: 0-40°C continuous full load
  • 100,000 hour MTBF rating for long-term reliability
Total Power Output850 W
Efficiency Rating80 PLUS Platinum (92%)
AC Input Voltage100 - 240 V
AC Input Frequency47 - 63 Hz
Input Current12 A
Power Factor CorrectionActive
Combined Output +3.3V110 W
Combined Output +12V849.6 W
Combined Output +5V110 W
Combined Output -12V3.6 W
Combined Output +5Vsb15 W
Maximum Output Current +3.3V20 A
Maximum Output Current +12V70.8 A
Maximum Output Current +5V20 A
Maximum Output Current -12V0.3 A
Maximum Output Current +5Vsb3 A
Hold-up Time17 ms
Power Good Signal Delay100 - 150 ms
Protection FeaturesOVP (Over Voltage Protection), OCP (Over Current Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), OTP (Over Temperature Protection)
Motherboard Connector24-pin ATX
Motherboard Cable Length55 cm
CPU Power Connectors1x 12+4pin EPS/ATX12V
CPU Cable Length70 cm
PCIe GPU Connectors4x 6+2pin PCIe
SATA Power Connectors6x SATA
SATA Cable Lengths450 mm, 600 mm, 750 mm
Molex 4-pin Connectors4x 4-pin Molex
Molex Cable Lengths300 mm, 450 mm, 600 mm, 750 mm
Cable TypeFully Modular
Form FactorATX
ATX Version3.1
Fan TypeHydraulic Bearing (FDB)
Fan Diameter13.5 cm
Number of Fans1
Cooling TypeActive
Operating Temperature0 - 40 °C (continuous full load)
Storage Temperature Range-20 - 70 °C
Operating Humidity20 - 90%
Storage Humidity5 - 95%
MTBF100,000 hours
Unit Dimensions150 mm (W) x 140 mm (D) x 86 mm (H)
ColorBlack
Safety CertificationsCE, UKCA, FCC, ICES, CB, TUV, cTUVus, LVD, CCC, BSMI, S-MARK, EAC, RCM
Warranty5 years